Now, being able to read the water is a huge advantage as a fishermen. On the surface and lakes and rivers they all look pretty much the same. But its subsurface where it all happens. There’s banks of weed, troughs, gullies, these are all brilliant fish holding spots. And it’s particularly important in summer but imagine what it’s like in winter when the fish really shoaled up. If you could understand what was under the the water you could try and get among those shoals of fish straight away. Now thanks to some new technology the iBobber, we can now see under water, you can find the features and you can find the fish. Let me explain how it works.
So what exactly is an iBobber? Well it’s a castable sonar device. So what’s sonar all about? Well it’s the sort of stuff the trawler men used to use years ago and still use it now to check the seabed to find out where the shoals of fish are so they can scoop them up and you can have cod and chips down the chippy. All that technology has now been refined into a tiny little device here is, you can cast it out, you can read the lake bed, you can find where the fish are. It’s amazing technology. Let me show you how you make it work on the bank.
The first step to start seeing under water and finding your fish is to get the thing powered up. Now it comes with a USB lead you plug it in, there’s a normal plug or into your laptop or computer. Now this Bobber goes into the port, attach it so like that and it does start to glow blue you’ll see it easier obviously if it was a darker room. And you just let it charge, and that charge will stay in the iBobber for up to a month. So its pretty long lasting. Now step 2 of this simple procedure of setting up is to download the app. It’s a free app, and again it’s simple to do from the App Store. You can use it on your mobile phone or indeed a tablet. Now it uses latest technology. It uses Bluetooth 4. Now that means there’s less of a drain than previous models and also it’s less intermittent so you get a more powerful connection. Once the iBobber is charged you need to sync the two together. So you take it off charge so you just knock it off like that. And then from the app you start to fill in your details. So you’ll put your email address in, your own tagline, mine’s Esox1969after pike and the year my birth because I’m a pike fanatic, and then you’ll be able to start to build your details on your phone and personalise the connection between the two.
Now step four, well that’s about getting down the lake or river and giving it a go. What you have got to do is attach this to your rod and reel. You need a fairly strong rod. I use a carp rod with a shock leader on it. but you could just use any many powerful-ish rod. It weighs about 2 ounces so it doesn’t want to be something that’s going to break. You cast it out and you start to get the information on your phone or on your tablet. Now the first thing I’m going to show you is mapping the water. Now this is really important like I said before it’s the underwater world, the contours, the gullies, the weed beds. This is where the fish sit, and its a trick I’ve used many times with the iBobber to catch me some big carp, as well as pike and tench. Now all you’ve got to do, this thing switches on when it hits the water. Lay it down, and I’m going to go into the app, into the section marked mapping water. It’s at the top of your screen. You’ll see a little arrow pointing to an underwater map. Click it on, and it tells you to cast out.
So let’s flick it out. Now this will map to a hundred feet out,and over hundred feet of water, a hundred and thirty-foot I think as much as. So you cast it out, and you refer to your app and it tells you to start mapping. Press OK. And then start to reel in slowly. Now don’t do it too fast and nice and steady and slow, two feet per second is the default setting but you can change it to suit yourself. Wind in slowly and all the time it’s emitting sonar beams down to the bottom and back again and gathering all that information up. When you’ve got to the edge,go back to your app, and counts down the three seconds and it delivers the map of the lake bed or the riverbed wherever you fishing and you can start to understand the contours and then where the fish might be living. Now another crucial part of the iBobber is the finding the fish feature, because this lets you identify where shoals of fish or individual fish are. It will tell you what depth they are lying at so you can choose the kind of rig you need, so if you were carp fishing you could use a ‘zig rig’ up in the water or a bottom bait. Or if you were lure lure fishing you might use crank bait lower down the water or maybe even a surface popper if they were high. So you can understand where they’re sitting in the water column. Also, it will tell you the size of fish. So there’s an orange tag on the fish that says they’re sort of smaller maybe under 15 inches and a green coloured one that says they’re bigger. It’s a good indicator to give you sort of a pointer to what you’re after.
On Ebay today
Another great advantage with iBobber is it can be used at night when the fish are often the most active. By using the status bar you can put the light on inside. So cast it out and you’ll be able to see it. Also on the device in the status bar you’ve got a fish alarm, and that can activate when it goes over a fish. OK so we’ve seen how it works. The best thing now is to stay active I mean the fish aren’t always going to come to you, you need to go to them sometimes. So I’m going to wander around find some spots either some spots fish on the water or some nice contours where I think will be perfect set a trap and put a bait. And I’m gonna sit back and see if it pays off. Well I’ve had a good look around. I’m going to make a few more casts. This looks a nice spot to push your way through here to the reeds and there’s a bit the tree there. If this had a nice shelf, I could find the drop off and then put a bait there. So I quite fancy this if it looks right underwater. So lets cast out. And of course with these things are hardly makes any splash. So you’re not going to scary anything that’s there there either. Lets have a look. OK, we’ve crept into position. We’ve got a lot of cover here so when I cast out, flick it out. Now, it’s activated because the iBobber is in water.
Lets go to the app. Now we’re going to go on underwater mapping and it’s telling me to, 3-2-1 yep. So now I can start retrieving. So I’m going to do two feet per second, something like that. Steady anyway, don’t have to be too precise. Now there’s been no disturbance so whatever is down there isn’t going to be scared off. But you might do if you were using a mark float. That’s it. We’re in. So press it again, and then I’ve got it. An underwater map of the contour here. It’s about two feet and then it drops off down a slope and then steadies away. So it’s the bottom of that slope I want to be because that’s where the fish are going to be patrolling along that so it’s a nice drop off let’s put a trip down there and leave it and see how we go. Lets keep quiet.
So there you have it. iBobber really works. I’ve used it to catch carp on lakes by positioning bottom baits near shelves. I’ve used it to catch really big pike in Ireland. I’ve just dangled all this thing off the edge of a boat and been able spot the underwater features, and shoals of silverfish. It’s a really great tool and that uses the latest technology so it doesn’t drain your battery. But the best thing about it is the price. It’s under a hundred pounds. You can’t go wrong. Please click here for Availability and Latest Prices for fish Finders on Amazon